Improvement of dielectric, magnetic and thermal properties of OPEFB fibre-polycaprolactone composite by adding Ni-Zn ferrite

The dielectric and magnetic behaviour and thermal properties of composites based on nickel–zinc ferrite (NZF) filler can be improved by the addition of various types of materials. Amongst others, ferrite–polymer composites have been subjected to a wide range of research, due to their extensive applications: electromagnetic interference shielding, microwave absorption, electrodes and sensors. Currently, the interest in scientific and technical searches for the potential outcomes of ferrite–polymer materials due to their different uses in applications such as telecommunication applications, microwave devices and electromagnetic interference shielding has been growing stronger. The dielectric and magnetic behaviour and thermal properties for such composite materials depend on size, shape and the amount of filler addition. Nickel–zinc ferrite material was prepared using the conventional solid-state reaction technique. This study highlights the development of microwave-absorbing material from NZF by adding natural fibres, Oil Palm Empty Fruit Bunch (OPEFB) and polycaprolactone (PCL). OPEFB is considered in this study because it is a solid waste product of the oil palm milling process which is widely and cheaply available. The use of OPEFB in this product may save the environment from oil palm solid waste. A Thermal Hake blending machine was used in blending the powder structure of NZF + OPEFB + PCL, which made it homogeneous. These composites were characterized by the use of Fourier transform infrared (FTIR) spectrometry and scanning electron microscopy (SEM). The thermal degradation behaviour of the composites was analyzed using thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) thermograms. The effective permittivity and effective permeability was obtained over a broad frequency range from 8 to 12 GHz at room temperature. It was observed that the values of effective permittivity and permeability increased as the content of NZF content increased. A rectangular waveguide connected to a microwave vector network analyser (PNA) (HP/Agilent model PNA E8364B) was employed in measuring the reflection coefficient S11 and transmission coefficient S21 parameters of composites for different percentages of NZF filler. This parameter was then used in calculating the microwave absorbing properties (dB)

Microwave characterization of bio-composites materials based finite element and Nicholson-Ross-Weir methods

In this work, Bio-composite of oil palm empty fruit bunch fibre (OPEFB)-filler and polycaprolactone (PCL)-polymer has been prepared and characterized. The functional groups and morphology of the prepared samples were characterized by Fourier transform infrared spectroscopy (FT-IR). By using the Nicholson- Ross-Weir (NRW) mode, both of real and imaginary relative permittivity values of the samples were obtained simultaneously from the reflection and transmission coefficient measurements of the materials. Whereas, the attenuation with the field distribution at the waveguide filled with a sample were considered by using the Finite Element Method (FEM). The magnitude of the reflection and transmission (R/T) coefficients of the composite with different filler percentages were measured using rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in X-band range of frequency. The computations of the S-parameters were achieved by using the FEM technique along with NRW mode. Then, the obtained results were compared with the measured R/T coefficients. Relative error results nominated the FEM mode due to its highly accurate results than the other method

Synthesis, thermal, dielectric, and microwave reflection loss properties of nickel oxide filler with natural fiber‐reinforced polymer composite

Fabrication of hybrid composite of nickel oxide (NiO) combined with oil palm empty fruit bunch (OPEFB) reinforced with polycaprolactone (PCL) has been done by using thermal Haake blending machine, which ensured mixture homogeneity. All hybrid composites' characterizations were carried out using X-ray diffraction (XRD), Fourier transform infrared spectrometry, differential thermogravimetry, thermogravimetric analysis, and scanning electron microscopy. The results showed that the XRD profile patterns of the composites clearly changed as the filler loading amount was increased. Fourier transform infrared spectra illustrated a slight change in the frequencies and positions of the peaks after adding NiO, indicating that some interactions occurred between C=O and O–H or among the fiber, NiO, and PCL. The microwave electromagnetic properties, such as reflection loss (dB), relative complex permittivity (ε r = (Formula presented.) –j (Formula presented.)), and permeability ((Formula presented.) −j (Formula presented.)) were calculated at various microwave frequencies in the X-band (8–12 GHz) range. It was observed that the thermal stability, magnetic, and dielectric properties of NiO:OPEFB:PCL composites were modified significantly with NiO addition. This enables the new hybrid composites to be used as engineering materials in the microwave applications

Biodegradable Poly (Lactic Acid)/ Poly (ethylene glycol) Reinforced Multiwalled Carbon Nanotube Nanocomposite Fabrication, Characterization, Properties, and Applications

This paper presents the electromagnetic interference properties of multi-walled carbon nanotubes (MWCNTs) as a novel nano-reinforcement filler in poly (lactic acid) (PLA)/poly (ethylene glycol) (PEG) polymer matrix that was prepared via melt blending mode. Plasticization of PLA was first carried out by PEG, which overcomes its brittleness problem, in order to enhance its flexibility. A waveguide adapter technique was used to measure the dielectric properties εr , and S-parameters reflection (S11) and transmission (S21) coefficients. The dielectric properties, microwave attenuation performances, and electromagnetic interference shielding effectiveness (EMISE) for all the material under test have been calculated over the full X-Band (8–12 GHz) due to its importance for military and commercial applications. The prepared samples were studied while using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transforms infrared spectroscopy (FTIR), mechanical properties measurements, as well as thermogravimetric analysis (TGA). The results showed that the dielectric properties increased with increased multi-walled carbon nanotubes (MWCNTs) filler, as well as the shielding effectiveness of the MWCNT/PLA/PEG nanocomposites increased with the increasing of MWCNTs. The highest SE total value was found to be 42.07 dB at 12 GHz for 4 wt.% filler content. It is also observed that the attenuation values of the nanocomposites increased with an increase in MWCNTs loading, as well as the power loss values for all of the samples increased with the increase in MWCNTs loading, except the amount of the transmitted wave through the nanocomposites